Epoxy resin, metal-filled. For quick repairs, e.g. to stone, hard plastic, torn threads and holes, cracks and holes in pumps and housings, containers, tanks, engines, boats and much more.
The epoxy putty is easy to use and specially designed for steel and metals: it hardens within a very short time and is as hard as metal as a result. It is very resilient and can be machined, e.g. drilled, sanded and milled. The putty is simply kneaded and can be modelled or filled.
APPLICATION:
The surface of the objects to be repaired must be clean and free of oil and grease. Roughen the surface to increase adhesion. Cut off the required amount of epoxy stick and knead for about 2 minutes until the compound has a uniform colour and the putty is warm. Then apply the epoxy compound to the area to be repaired and mould it.
If the surface is to be worked mechanically, wait about 25 - 30 minutes. Final hardness will be reached after 24 hours. Do not apply at ambient temperatures below 5° C.
TECHNICAL INFORMATION:
Chemical base: epoxy resin (metal filled)
Colour: dark grey, matt
Mixing ratio: 1:1 (by volume)
Pot life: 3 to 4 minutes
Hand strength: 8 to 10 minutes
Final strength: 24 hours
Processing temperature: +10° C to +30° C
Curing temperature: +5° C to +30° C
Temperature range: -50° C to +180° C (short-term +300° C)
Hardness: Shore hardness D 87
Tensile shear strength: 4.5 N/mm²
Shrinkage: 0.05 %
Bonding gap bridging: 15 mm
Thermal conductivity: 0.61 W/mK
Dielectric strength: 3.0 kV/mm
The product is subject to labelling according to GHS/CLP directives. Labelling according to Regulation (EC) 1272/2008:
Signal word: DANGER
Contains: Reaction product: Bisphenol A epichlorohydrin resins with average molecular weight = 700; Fatty acids, oligomeric reaction product with tall oil fatty acids and triethylenetetramine
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H411 Toxic to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand. P102 Keep out of the reach of children. P280 Wear protective gloves / eye protection / face shield. P333+P313 If skin irritation or rash occurs: Get medical advice / attention. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. P310 Immediately call a POISON CENTER / doctor /... immediately. P501 Dispose of contents / container in accordance with local / national regulations.
EUH205 Contains epoxy-containing compounds. May cause an allergic reaction.
No customer reviews for the moment.
check_circle
check_circle
