Fine dust mask re-usable 6000

Lightweight, easily customisable fine dust mask re-usable. Reusable. Easy to clean. Flexible modular filter system.

Filters are easily attached to the mask using a bayonet connection. Mask body made of thermoplastic material, inhalation valve made of natural rubber, exhalation valve made of silicone.

Please order half mask body and filter separately!

Half mask body:

3M 6100 - Half mask body small
3M 6200 - Half mask body medium
3M 6300 - Half mask body large

Fine mask re-usable filter system:

3M 2125 P2 R: Filter set particle protection P2 (2 filters)
3M2128 P2 R with activated carbon filter: Filter set particle protection P2 with activated carbon filter (2 filters)
3M2135 P3 R: Filter set particle protection P3 (2 filters)
3M6055 A2: Filter set gas and vapour protection A2 (2 filters)
3M6095 A2P3 R: Combination filter set particle, gas and vapour protection A2P3 (2 filters))

Filter classes:

R: re-usable/reusable
Filter class P2: Protection against solid and liquid particles; maximum permissible concentration of pollutants 10 times the OEL value with a fine dust mask re-usable/15 times the OEL value with a full face mask.
Filter class P3: Protection against solid and liquid particles; maximum permissible concentration of pollutants 30 times the OEL value with a fine dust mask re-usable/400 times the OEL value with a full face mask.
Activated carbon filter: protects against unpleasant odours.
Filter class A2: A Protection against gases and vapours of organic compounds, 2 medium (30 times the limit value with fine dust mask re-usable, 0.5 vol-% (5,000 ppm))

Class P filters are not suitable for protection against gases and vapours (e.g. substances containing solvents)!

Application examples:

P2: Grinding, cutting, drilling of cement, concrete, wood (without hardwood), stone, steel (without stainless steel); soldering; welding of structural steel, zinc
P3: Grinding, cutting, drilling of hardwood, stainless steel; welding of stainless steel
A2: Cleaning with white spirit/nitro thinner, painting solvent-based paints, processing synthetic resins (A1: Bonding with solvent-based adhesives)
A2P3: Spraying solvent-based paints and synthetic resin paints

Please note: The application examples serve as a rough guide. Check the protection requirements in each individual case depending on the material and exposure!