Apoxie® Sculpt epoxy modelling compound 110 g

Self-curing two-component epoxy modelling compound. 0 % shrinkage. High adhesive strength. Cures within 24 hours.

Apoxie Sculpt is a putty-like material with a fine, smooth texture that is very easy to model and has a very high adhesive strength on a wide variety of materials. The epoxy compound is self-curing with 0% shrinkage, extremely durable and very hard after curing, with a slightly glossy surface. The cured compound is excellent for further processing, sanding, carving, turning, cutting, turning, drilling, etc. without cracking or flaking. Apoxie Sculpt is suitable for indoor and outdoor use as well as for underwater use, e.g. in aquariums. After curing, the epoxy compound is waterproof/waterproof, frost-resistant and non-flammable.

Apoxie Sculpt adheres to many materials, e.g. other epoxy compounds (and to itself), ceramics, metal, wood, stone, glass, plastics, foams, fibreglass, polymers. It is ideal for modelling, bonding, filling, embellishing and repairs.

Apoxie Sculpt is available in different colours that can be easily mixed with each other. Objects made of Apoxie Sculpt can be painted after curing and surface-finished in a variety of ways. Moulding with silicone is possible.

Application:

Always wear gloves (e.g. made of nitrile) when working with Apoxie Sculpt. Use different tools when measuring out component A and component B.

To prepare the modelling material, mix component A and component B in equal parts (50:50 by weight) and knead the mixture of the two components very thoroughly for approx. 2 minutes to achieve a uniform and even consistency and colour. Please note that incomplete mixing can lead to poor results. Allow the mixture to rest for 5 minutes, then it is ready for use.

The packaged components of Apoxie Sculpt have a shelf life of several years. If component A is no longer easy to knead, it can be made pliable again by warming it slightly and then kneading it with component B.

Technical data:

Processing time: approx. 1 - 3 hours

In the first half hour, the compound is very sticky and has the highest adhesive strength.
Within 1 - 2 hours, the compound is very easy to work with.
Within 2 - 3 hours, the compound begins to harden and work requiring greater stability, e.g. a structure or the carving out of details, is possible.
After 24 hours, the compound is completely hardened.

Other colours are available on request. The colour chart can be found under Further information.

APOXIE SCULPT COMPONENT A:

The product is subject to labelling according to GHS/CLP guidelines. Labelling according to Regulation (EC) 1272/2008:

GHS07, GHS09

Signal word: CAUTION

UFI: 3JPV-G0SW-100E-Q7RS

H317 May cause an allergic skin reaction. H319 Causes serious eye irritation H411 Toxic to aquatic life with long lasting effects.

P101 If medical advice is needed, have product container or label at hand. P102 Keep out of the reach of children. P103 Read label before use. P261 Avoid breathing dust / fume / gas / mist / vapours / spray. P280 Wear protective gloves when combining components A + B. Wear at least an N95 fine dust mask when sanding the cured product. P273 Avoid release to the environment. P302+P352 In case of contact with skin: Wash with plenty of water and soap. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing. P337 + P313 If eye irritation persists: Get medical advice / attention. P391 Take up spillage. P501 Dispose of contents / container in accordance with public waste disposal or recycling facilities.

APOXIE SCULPT COMPONENT B:

The product is subject to labelling according to GHS/CLP guidelines. Labelling according to Regulation (EC) 1272/2008:

GHS07, GHS08, GHS09

Signal word: CAUTION

UFI: 3JPV-G0SW-100E-Q7RS

H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H315 Causes skin irritation. H411 Toxic to aquatic life with long lasting effects.

P101 If medical advice is needed, have product container or label at hand. P102 Keep out of the reach of children. P103 Read label before use. P261 Avoid breathing dust / fume / gas / mist / vapours / spray. P280 Wear protective gloves when combining components A + B. Wear at least an N95 fine dust mask when sanding the cured product. P273 Avoid release to the environment. P302+P352 In case of contact with skin: Wash with plenty of water and soap. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing. P337 + P313 If eye irritation persists: Get medical advice / attention. P501 Dispose of contents / container in accordance with public waste disposal or recycling facilities.