Bush hammering pneumatic bush hammer shank 13 mm conical with carbide pattern plate

Diamond air chisel with carbide moulding plate with 13 mm tapered shank. Total length approx. 190 mm.

The bush hammering chisels are also available in a shorter version with a length of approx. 120 mm on request. They are also available in an angled version for an additional charge.

The pneumatic tools with carbide insert from BAVARIA are suitable for hard stone such as granite, but also for softer types of stone such as marble or hard limestone.

The name Diamont refers to the high hardness of tungsten carbide, the material from which the tool cutting edges are made. Diamont tools do not contain any diamond.

Sculpting tools made of carbide or with carbide inserts are particularly suitable for processing hard types of stone. Carbide tools need to be resharpened less frequently during work, as the material is so strong that there is less abrasion than with tools made of forged steel. The carbide cutting edge therefore has a longer service life. However, if carbide tools are ground very sharp or thin, careful working is required as carbide is a brittle material due to its hardness and can easily break when ground thin. Levering movements during hammering can also lead to breakage or cause carbide pins to come loose from the steel casing.

You can find out more about the special features, production and quality of BAVARIA carbide tools in an interview with Andreas Weber, owner of BAVARIA Steinmetzwerkzeuge.

The illustration shows the shank in Ø 12.5 mm