
BAVARIA Forged chisel with 13 mm tapered carbide shank
All prices incl. VAT, plus shipping costs.
For deliveries to countries other than Germany
the final prices may change in the checkout.
MORE INFO
Available items go immediately to shipping - free postage from 150 € in Germany for most items - 60 days return policy!
All prices incl. VAT, plus shipping costs.
For deliveries to countries other than Germany
the final prices may change in the checkout.
MORE INFO
Diamond pneumatic forged chisel in heavy-duty design (18 - 40 mm) or light-duty design (16 mm) with 13 mm conical insertion end. Octagonal steel. Total length approx. 220 - 270 mm (18 - 40 mm width) or 200 - 220 mm (16 mm width). Compatible e.g. with BAVARIA CP 711 chisel hammer.
The 16 mm chisel has an easy-cutting 3 mm thick carbide insert, the 18 - 40 mm wide chisels have a strong 4 mm carbide insert and are designed for medium to heavy-duty pneumatic hammers.
The pneumatic tools with carbide insert from BAVARIA are suitable for hard stone such as granite, but also for softer types of stone such as marble or hard limestone.
The name Diamont refers to the great hardness of tungsten carbide, the material from which the tool cutting edges are made. Diamont tools do not contain any diamond components.
General information on carbide chisels:
Sculpting tools made of carbide or with carbide inserts are particularly suitable for working hard types of stone. Carbide tools need to be sharpened less frequently during work because the material is so strong that there is less abrasion than with tools made of forged steel. The carbide cutting edge therefore has a longer service life. However, if carbide chisels are ground to a very sharp or thin point, careful working is required, as carbide is a brittle material due to its hardness and can easily break when ground thinly. Levering movements during hammering can also lead to breakage or loosen the carbide pin from the steel casing.
The rule of thumb for hard stone is: the harder the stone, the blunter the cutting angle of the chisel should be. With hard stone such as granite, the chisel is placed at almost a right angle and the stone is virtually pulverised. The chisel therefore has a very blunt cutting edge. For crystalline stone such as hard marble, a more pointed tool with a sharper cutting edge is required. The chisel is set flat so that the stone can chip off without damaging the underlying crystalline structure.
Find out more about the special features, production and quality of BAVARIA carbide tools in an interview with Andreas Weber, owner of BAVARIA Steinmetzwerkzeuge.