
CALTRA CALMIX 801 Pouring stone
All prices incl. VAT, plus shipping costs.
For deliveries to countries other than Germany
the final prices may change in the checkout.
MORE INFO
Available items go immediately to shipping - free postage from 150 € in Germany for most items - 60 days return policy!
All prices incl. VAT, plus shipping costs.
For deliveries to countries other than Germany
the final prices may change in the checkout.
MORE INFO
Fast-hardening, cement-based cast stone for small to medium-sized moulds. Pigmentable.
The high-quality cement mortar based on special cements and additives has a high initial strength and fast initial adhesion. Objects made of CALMIX 801 can be installed both indoors and outdoors, as the material is frost-resistant, windproof and waterproof. CALMIX 801 is chloride-free and alkali-resistant. Additives ensure durability and shrinkage compensation. The compound can also be used for repairs.CALMIX 801 is particularly suitable for casting small to medium-sized moulds. Larger moulds can also be cast by adding coarse sand (up to max. 20 %). CALMIX 801 is pigmentable.
APPLICATION:Mix CALMIX 801 with clean tap water in a clean mixing vessel using an electric stirrer or mortar mixer to form a solid, lump-free mixture (3.36 litres of water to 20 kg of CALMIX 801). Allow the mixture to mature for approx. 5 minutes, then mix the prepared mortar thoroughly once again and process immediately. The object can be demoulded after approx. 30 minutes. The final strength is achieved after 28 days.
TECHNICAL INFORMATION:
Mixing time: ~ 5 minutes
Processing time: approx. 10 minutes
Demoulding time: approx. 30 minutes
Final compressive strength (after 28 days): 50 MPa
Final flexural strength (after 28 days): 10 MPa
Processing temperature: +5° C to +20° C (substrate and ambient temperature)
Mixing ratio: 3.36 litres of water to 20 kg / 4.2 litres of water to 25 kg of CALMIX 801
Yield: 1 kg of material yields 640 ml of casting compound
Can be stored in a closed container in a cool, dry and frost-free place for at least 6 months.
The product is subject to labelling according to GHS/CLP guidelines. Labelling according to Regulation (EC) 1272/2008:
GHS05, GHS07
Signal word: DANGER
Contains: Calcium sulfoaluminate clinker
Cement, Portland, Chemicals
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation.
P261 Avoid breathing dust. P280 Wear protective gloves / eye protection / protective clothing. P302+P352 IF ON SKIN: Wash with plenty of soap and water. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Rinse further. P310 Immediately call a POISON CENTER / doctor.