Two-component casting resin, unfilled, transparent with very high resistance to yellowing. For casting layers up to max. 60 - 80 mm thick. Component A + component B.
For models and transparent objects. Hardens at room temperature.
TECHNICAL INFORMATION:
Mixing ratio by weight (g): 100:40 (A:B)
Mixing ratio by volume (ml): 100:46 (A:B)
Working time at 25°C (100 ml, 40 mm): > 2 hours
Demoulding time (15 ml, 5 mm, 25° C): 24 - 48 hours
Post-curing at 40° C (recommended): 10 - 15 hours
Maximum recommended casting thickness: 60 - 80 mm
The maximum casting thickness depends heavily on the mould material, the dimensions and the room temperature.
Properties of resin RP026UV (component A) before processing:
Viscosity at 25° C: 600 - 800 mPas
Colour: colourless
Density at 25° C: 1.09 - 1.12 g/ml
Properties of hardener IPE744 (component B) before processing:
Colour: colourless
Density at 25° C: 0.95 - 1.00 g/ml
Viscosity at 25° C: 60 - 80 mPas
Properties after curing:
Colour: colourless
Density at 25° C: 1.05 - 1.10 g/ml
Glass transition: 50° - 55° C
Epoxy casting resin RP026UV (component A)
The product is subject to labelling according to GHS/CLP directives. Labelling according to Regulation (EC) 1272/2008:
UFI: YAH6-U415-WS1A-5CWR
GHS07, GHS09
Signal word: CAUTION
Contains: Reaction product: Bisphenol-A-(epichlorohydrin)
Epoxy resin (average molecular weight <= 700)
Oxirane, mono-[(C12-14-alkyloxy)-methyl] derivatives
Reaction mass of bis(1,2,6-pentamethyl-4-piperidyl)sebacate and methyl-1,2
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects.
P261 Avoid breathing dust/ fume/ gas/ vapour/ mist. P264 Wash tools thoroughly after handling. P273 Avoid discharge into the environment. P280 Wear protective gloves/ clothing and safety goggles/ face shield. P333 + P313 If skin irritation or rash occurs: Get medical attention. P391 Collect spilled material.
EUH205 Contains epoxy compounds. May cause an allergic reaction.
Hardener IPE744 (component B)
The product is subject to labelling according to GHS/CLP directives. Labelling according to Regulation (EC) 1272/2008:
UFI: EMPH-FRGE-5127-HJWC
GHS05, GHS07, GHS09
Signal word: DANGER
Contains: Propylidynetrimethanol, propoxylated, reaction products with ammonia
H302 + H312 Harmful if swallowed and in contact with skin. H314 Causes severe skin burns and eye damage. H411 Toxic to aquatic life with long lasting effects.
P264 Wash tools thoroughly after handling. P273 Avoid discharge into the environment. P280 Wear protective gloves/clothing and safety goggles/face shield. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes and remove contact lenses, if present and easy to handle. Continue rinsing. P310 Immediately call a POISON CENTER or doctor. P391 Collect spilled material.
No customer reviews for the moment.
check_circle
check_circle
