Notched handpiece H50C with 6 irons

Chisel handpiece with 6 carving irons for use in wood, soft soapstone, plaster and plastic.

The notching handpiece converts the rotating movement of the Foredom suspension motor into a percussive movement and a speed of 8,000 rpm is recommended for use as a percussion hammer.

With 6 gouges:
flat edge 9 mm, gouge 1
flat edge diagonal 9 mm, gouge 2
gouge edge 9 mm, gouge 3
gouge edge 8 mm, gouge edge 7
gouge edge 3.5 mm, gouge edge 11
gouge edge 70°, 5.5 mm

This handpiece has a robust plastic body with tapered aluminium ends. The H.50C is particularly suitable for use in the low speed range with the LX hang-up motor and in forward operation with the SR hang-up motor. The H.50 chisel handpiece can be used with any flex shank with a standard key tip shaft.

Chisel handpieces may only be operated when the motor is running forwards! The chisel handpiece is easier to operate with a table-top control than with a foot pedal. Please order separately!

Recommended speed:

Optimum speed range: 3,000 - 10,000 rpm
Maximum speed: 18,000 rpm

Technical specifications:

Length approx. 15.24 cm (6")
Diameter approx. 2.54 cm (1")

Maintenance:

The H.50 chisel handpiece must be regreased after around 200 hours. Please order oil for the handpiece separately!