Polyester gelcoat + hardener

Two-component gelcoat for waterproof coating, impact-resistant. 1 kg. Component A + polyester curing agent MEK-peroxide (component B).

Unsaturated polyester resin. Can be coloured particularly well with pigment paste. High-quality resin with very good mechanical properties: very hard, impact resistant, water and chemical resistant. Easy to process.

APPLICATION:

Process polyester gelcoat at room temperatures between 15° and 30° C and a humidity of <80 %. First add pigment paste to obtain the final colour. Mix the polyester gelcoat (component A) and pigment paste well (depending on the amount of mass, e.g. with a stirring attachment on the drill at moderate speed). Leave to rest for about 20 minutes, then add 1.5 to 2 % polyester curing agent MEK-peroxide (component B) and mix well. Apply first coat. Pot life approx. 20 - 30 minutes.

Further coats can be applied for laminating: After the polyester gelcoat has set in each case, each additional coat can be applied after approx. 60 minutes (at 20° C room temperature). For perfect adhesion, however, it is better to apply the next layer after 3 to 8 hours.

TECHNICAL DATA:

Pot life (200 g at 25° C): 20 - 30 minutes
Exothermic peak: 130° C
Demoulding time: 60 minutes
Colourless, clear

Polyester gelcoat (POLYCOR ISO BR) - COMPONENT A:

The product is subject to labelling according to GHS/CLP guidelines. Labelling according to Regulation (EC) 1272/2008:

UFI: 9MD1-F0A5-F00C-307U

GHS02, GHS07, GHS08

Signal word: DANGER

Contains: Cobalt octoate; Styrene

H226 Flammable liquid and vapour. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H361d Suspected of damaging the unborn child. H372 Causes damage to organs through prolonged or repeated exposure if inhaled. H412 Harmful to aquatic life with long lasting effects.

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. P243 Take precautionary measures against static discharges. P260 Do not breathe dust / fume / gas / mist / vapour / aerosol. P273 Avoid release to the environment. P280 Wear protective gloves / protective clothing / eye protection / face shield. P302+P352 After contact with skin: Wash with plenty of soap and water. P304+P340 If inhaled: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 In case of contact with eyes: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing. P403 + P233 Store in a well-ventilated place. Keep container tightly closed.

Polyester curing agent MEK-peroxide (Butanox M-50) for polyester resin 26/71 - COMPONENT B:

The product is subject to labelling according to GHS/CLP guidelines. Labelling according to Regulation (EC) 1272/2008:

UFI: FQP1-X0K4-X004-YVC8

GHS02, GHS05, GHS07

Signal word: DANGER

Contains: Methyl ethyl ketone peroxide; reaction mass of butane-2,2-diyl-dihydroperoxide and di-sec-butylhexaoxidane (CAS No. 1338-23-4)

H242 Heating may cause a fire. H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H332 Harmful if inhaled.

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. P234 Keep only in original container. P280 Wear protective gloves / protective clothing / eye protection / face shield. P303+P361+P353 In case of contact with skin (or hair): Take off immediately all contaminated clothing. Wash skin with water/shower. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes and remove contact lenses, if present. Continue rinsing. P370 + P378 In case of fire: Use water spray, alcohol-resistant foam, dry powder or carbon dioxide to extinguish.