Wax-based release spray. Contains solvents.
Very suitable, for example, when moulding directly with epoxy resin and polyurethane resin. Recommended e.g. for PU fast resins and flexible resin castings. Less recommendable under gel-coat. Not recommended on porous materials, as these absorb the release wax spray too much. Not suitable as an impregnation.
Application: Spray on very thinly and leave to dry for 5 - 10 minutes.
Wax, dissolved in aliphatic hydrocarbons. Contains naphtha (petroleum). Please observe the hazard warnings on the spray can.
The product is subject to labelling according to GHS/CLP directives. Labelling according to Regulation (EC) 1272/2008:
UFI: DH90-H09J-U00R-GUT8
GHS02, GHS07, GHS09
Signal word: DANGER
Contains: Naphtha (petroleum), hydrotreated light naphtha; Low boiling point hydrogen treated naphtha.
H222 Extremely flammable aerosol. H229 Pressurised container: may burst if heated. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P273 Avoid release to the environment. P391 Take up spillages. P410 Protect from sunlight. P412 Do not expose to temperatures exceeding 50 °C / 122 °F.
No customer reviews for the moment.
check_circle
check_circle
