Fast hardener. For transparent epoxy resin EC 141 NF.
Hardener W 242 (component B): Accelerates the curing process. Recommended for casting up to a maximum thickness of 1 cm. Good resistance to yellowing. Excessive UV radiation causes slight clouding.
Hardener W 241 (component B): Long processing time. Recommended for casting coatings with a thickness of 3 - 5 cm or for casting up to a maximum thickness of 10 cm at a quantity of 1 litre.
| Hardener | W 241 | W 242 NF |
| Processing time (pot life) | 75 - 95 minutes | 35 - 45 minutes |
| Gel time (100 ml, 25° C) | 140 - 180 minutes | 50 - 70 minutes |
| Gel time (15 ml, 6 mm, 25° C) | 10 - 12 hours | 4 - 5 hours |
| Demoulding time (15 ml, 6 mm, 25° C) | 36 - 48 hours | 18 - 24 hours |
The product is subject to labelling according to GHS/CLP guidelines. Labelling according to Regulation (EC) 1272/2008:
UFI: XM10-X0T1-P007-MF6A
GHS05, GHS07
Signal word: DANGER
Contains: 3-aminomethyl-3,5,5-trimethylcyclohexylamine Benzyl alcohol, 2,2,4-trimethylhexane-1,6-diamine
H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. 317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects.
EUH071 Corrosive to respiratory system.
P261 Avoid breathing dust / fume / gas / mist / vapour / spray. P273 Avoid release to the environment. P280 Wear protective gloves / protective clothing / eye protection / face protection. P303 + P361 + P353 In case of contact with skin (or hair): Take off immediately all contaminated clothing. Wash skin with water / shower. P304 + P340 + P310 If inhaled: Remove to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or doctor. P305 + P351 + P338 + P310 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing. Immediately call a POISON CENTER or doctor.
No customer reviews for the moment.
check_circle
check_circle
