
2CONSTRUCT super glue special 483-MV medium viscosity
All prices incl. VAT, plus shipping costs.
For deliveries to countries other than Germany
the final prices may change in the checkout.
MORE INFO
Available items go immediately to shipping - free postage from 150 € in Germany for most items - 60 days return policy!
All prices incl. VAT, plus shipping costs.
For deliveries to countries other than Germany
the final prices may change in the checkout.
MORE INFO
Medium-viscosity cyanoacrylate-based super glue. Very well-balanced ratio between viscosity, curing speed and strength.
2construct Special 483 cyanoacrylate adhesive is a perfect all-round super glue for most materials and applications where no extreme additional requirements are made. Special 483 super glue can be used to bond materials such as stone, wood, glass, metal, elastomers and many plastics.
APPLICATION
The parts to be bonded must be clean and free of grease and oil. Apply the adhesive to one side of the parts to be bonded, then align the parts without applying pressure and press them together. The adhesive hardens within seconds; maximum strength is achieved after 24 hours. Do not use at ambient temperatures below 5°C.
Cyanoacrylate adhesives cure even with the slightest moisture. As a rule, the surface moisture of the parts to be bonded or the moisture contained in the materials to be bonded is sufficient for this. However, the curing time can be significantly longer with very dry materials or a very dry environment, an adhesive film that is too thick or, for example, acidic woods such as birch or oak.
Polar plastics such as PP, PE, PTFE, silicone must be pre-treated with a primer in order to be able to bond them with Special 483.
TECHNICAL DATA 483-MV
Gap bridging: up to 0.2 mm
Viscosity before curing: 100 - 150 mPAS
Cures in seconds, maximum strength after 24 hours. Do not process below 5° C.
The product is subject to labelling according to GHS/CLP guidelines. Labelling according to Regulation (EC) 1272/2008:
Signal word: CAUTION
Contains: 2-cyanoacrylic acid ethyl ester
H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P280 Wear protective gloves/protective clothing/eye protection/face shield. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Rinse further. P321 Special treatment (see on this label). P405 Keep locked up. P501 Dispose of contents / container in accordance with local / regional / national / international regulations.
Additional information: Cyanoacrylate. Danger. Sticks skin and eyelids together within seconds. Keep out of the reach of children.