polishing powder G

For polishing granite & hard stone. For light-coloured and coloured granite-like stones. Ideal for granite. Contains aluminium oxide.

KAPRA polishing powder G can be used for polishing by hand and for polishing with a machine, e.g. with a felt disc.

APPLICATION

We recommend the following procedure for polishing by hand with polishing powder:

1. Pour the polishing powder onto a deep plate.
2. Moisten a jute cloth slightly (!) and dab it into the polishing powder.
3. Spread the polishing powder on the stone using a dabbing motion.
4. Allow the applied polishing powder to act briefly so that the chemical can react with the stone.
5. Rub the polishing powder into the stone vigorously (!) using the jute cloth. This can and should produce squeaking noises!
6. Dab the jute cloth into the polishing powder again and again and continue rubbing.
7. Finally, wash the polished stone thoroughly (!) so that the chemical cannot react any further.

To polish with the machine, first slurry the polishing powder with a little water to form a paste.

Wear nitrile gloves when polishing!

TECHNICAL INFORMATION

Classification according to Regulation (EC) No. 1272/2008: The product is not subject to labelling according to GHS/CLP guidelines.